This page provides answers to frequently asked questions about BICS. Can't find the answer to your question? Please contact the BICS Helpdesk.
BICS in general
What is BICS?
BICS stands for Inland Waterway Information and Communication System. It is software that allows inland waterway skippers to report their voyage and cargo details electronically to waterway authorities and port authorities.
BICS uses international standards for electronic reporting. This enables data to be exchanged in standardised messages with connected systems in various European countries. Whether and how BICS can be used on a particular waterway depends on the relevant waterway authority.
For more information, please visit the page Background information about BICS.
What is the difference between BICS Local and BICS Portal?
BICS Local and BICS Portal both allow inland waterway skippers to report their voyage and cargo details electronically. The main difference is how you use the system.
BICS Local is the installable version of BICS. You download and install the software on your computer or laptop. BICS Local is available for Windows and Linux devices. One important advantage is that BICS Local can be connected to external systems, such as navigation software. This will also be possible with BICS Portal in the future.
BICS Portal is the new, future-proof online version of BICS. You no longer need to install software, and updates are performed automatically. All you need is an up-to-date internet browser to use bicsportal.eu on various devices, such as computers, laptops, tablets and smartphones.
Is BICS suitable for mandatory electronic reporting?
Yes. BICS fully complies with the requirements for mandatory electronic reporting for all vessels subject to this obligation. You only need to enter the requested details; BICS takes care of the further processing of your electronic voyage report.
BICS uses the ERINOT message, which complies with the European standard for electronic reporting in inland waterway transport. For more information, please visit the page Background information about mandatory electronic reporting.
What device do I need to use BICS?
The device you need depends on which version of BICS you want to use:
BICS Local is software that you download and install on a Windows or Linux computer or laptop. Your device must meet the minimum system requirements. BICS Local is not available for macOS (Apple computers) or mobile devices.
BICS Portal is the online version of BICS, so you do not need to install any software. All you need is a device with an up-to-date internet browser and an internet connection. You can use BICS Portal via bicsportal.eu on computers, laptops, tablets and smartphones.
What do I need to do before I can start using BICS?
Before you can use BICS, you need to complete a number of steps:
- Create a Rijkswaterstaat Inland Shipping Account: Create a Rijkswaterstaat Inland Shipping Account.
- Apply for a Reporting ID for the BICS version you want to use: Apply for a BICS Reporting ID.
- Once your application for a BICS Reporting ID has been approved, you will receive a Welcome email containing step-by-step instructions on what to do next.
Who is responsible for electronic reporting?
The skipper is responsible for the entire content of the electronic report and for submitting the correct voyage and cargo details to the competent authorities on time. This also applies when the report is prepared or submitted by another party, such as a shipping company, charterer or terminal. The skipper remains responsible for the accuracy and completeness of the report.
As a skipper, please pay attention to the following points:
- Check that all details concerning the voyage, cargo quantity and stowage plan are correct and complete, including any changes made shortly before departure.
- Make clear arrangements with the shipping company, terminal or office about who is responsible for submitting the electronic report and who will communicate any changes.
- Check the cargo details you receive from terminals, such as container numbers, contents and weight. Have any inaccuracies corrected before continuing the voyage.
- Ensure that any changes to the voyage and cargo details, including loading and unloading operations along the way, are reported to the competent authorities in good time.
For more information, please consult the manual: Procedure for electronic reporting using BICS.
What is BICS demo mode and how do I use it?
Demo mode is only available in BICS Local. It allows you to try out the software, for example for educational purposes or to familiarise yourself with the features of BICS.
You do not need a Rijkswaterstaat Inland Shipping Account or a BICS Reporting ID to use demo mode. You can explore the features of BICS, but you cannot send messages for the purposes of mandatory electronic reporting.
You can enable demo mode the first time you start BICS Local after installation. In the First Use Wizard, select Yes in step 2, âDemo modeâ.
Would you like to use BICS later to submit actual voyage reports? You will then need to apply for a BICS Reporting ID and reinstall and configure BICS Local for regular use.
Can I use BICS as a recreational boater?
As a recreational boater, you can only use BICS if your vessel has an official vessel identification number accepted for electronic reporting. The only accepted numbers are an ENI number (âEuropean Number of Identificationâ) or an IMO number.
If your vessel does not have a suitable identification number, you cannot use BICS. You must first have the vessel officially registered and, where applicable, apply for a suitable vessel identification number.
Accounts
What should I do if I have forgotten my password?
The password you need to reset depends on which account you are having trouble accessing.
Password for your Rijkswaterstaat Inland Shipping Account
Have you forgotten the password for your Rijkswaterstaat Inland Shipping Account? You can reset it via the Forgot Your Password page.
BICS login password (BICS Local only)
When you start BICS Local, you will be asked to enter a username and password. The default login credentials are username bics2 and password bics2.
Have you set different login credentials and can no longer log in? Please contact the BICS Helpdesk for assistance with restoring your login credentials.
Experienced users can also try to restore the default BICS Local login credentials themselves via the Windows Command Prompt. To do so, use the command corresponding to your BICS version and check that the specified file path matches your installation.
BICS Local version 5:
c:\bics2\current\bin\bics2cmd.bat reset-user-password BICS2_APP_USER BICS2_APP_USER_PASSWORD bics2 bics2
BICS Local version 6:
First stop the bics2suite service before running the following command:
c:\bics2\current\bin\bics2cmd.bat reset-user-password SA "" bics2 bics2
What is a BICS Reporting ID?
A BICS Reporting ID is the identification number assigned to your BICS. The Reporting ID consists of nine digits and starts with 7000 for BICS Local and 8000 for BICS Portal. You can compare it to a PO box number: it ensures that messages reach the correct destination.
BICS uses the HERMES messaging service to route sent and received messages. The Reporting ID helps HERMES identify the origin of outgoing messages and deliver incoming messages to the correct destination.
In BICS Portal, Reporting IDs are processed entirely in the background. This happens automatically, so you will not notice it as a user and do not need to manage the Reporting ID yourself. A Reporting ID is therefore only displayed in your Welcome email for BICS Local.
Can I use my Reporting ID on multiple devices at the same time?
This is not recommended when using BICS Local. HERMES (the messaging service) uses your Reporting ID to determine which device messages should be delivered to. If you use BICS Local on multiple devices at the same time with the same Reporting ID, messages may be delivered to the wrong device. This can disrupt the provision of information.
This warning applies only to BICS Local. In BICS Portal, the Reporting ID is processed in the background; as a user, you do not need to configure or manage it yourself on multiple devices.
Installing/uninstalling BICS Local
How do I install BICS Local?
Follow the steps below to install BICS Local on your computer. Choose the instructions for your operating system.
Windows
- Download the latest version of BICS Local for Windows from the download page.
- Open the downloaded installation file named
BICS2-Install-6.x.x.yyyymmdd.exe. By default, this file is located in the folderC:\Users\username\Downloads. - Follow the instructions provided by the installer. Continue through the steps until the installation begins. The progress bar may temporarily appear to stop moving. BICS is still installing in the background. Please wait a few minutes for the installation to finish.
- Start BICS Local using the shortcut on your desktop or open
http://localhostin your browser.
Linux
Please note: run the installation with administrator privileges. To do so, use the sudo command in a terminal window.
- Download the latest version of BICS Local for Linux from the download page.
Open a terminal window and navigate to the folder where the installation file is stored. If the file is in your Downloads folder, use:
cd /home/username/DownloadsReplace
usernamewith your own username.Make the installation file executable using the following command:
chmod +x BICS2-Install-6.x.x.yyyymmdd.binReplace
6.x.x.yyyymmddwith the version and date information of the downloaded file.Run the installer with administrator privileges:
sudo ./BICS2-Install-6.x.x.yyyymmdd.binMake sure you use the correct version and date information for your installation file.
- Follow the instructions provided by the installer. The progress bar may temporarily appear to stop moving. BICS is still installing in the background. Wait a few minutes for the installation to finish.
- Start BICS Local by opening
http://localhostin your browser.
Installation log file
BICS Local creates a log file during installation. This file can be used to investigate any installation problems. You can find the log file in the following location:
- Windows:
C:\Users\username\bics2-install.log - Linux:
/var/log/bics2-install.log
What should I do if I receive an error code while installing BICS Local?
Have you received an error code while installing BICS Local? The installation may have failed, meaning that BICS may not have been installed correctly. Try the following steps to resolve the problem:
- Close other programmes: Close all other applications, browsers and File Explorer windows before restarting the installation.
- Check the system requirements: Make sure your device meets the minimum system requirements for BICS Local.
- Check your user permissions: Make sure you have the necessary permissions to install software. Depending on your operating system, administrator or root privileges may be required.
- Restart your device: After restarting, try installing BICS Local again.
Are you still receiving an error code? Please contact the BICS Helpdesk and provide the error code, if possible. This will help the Helpdesk assist you more effectively.
What can I do if certain files remain locked?
During the installation, reinstallation or removal of BICS Local, files may be locked because they are still in use. Try the following steps to resolve this problem:
- Restart your computer: After restarting, try running the installation or uninstallation again.
- Close all open programmes: Close internet browsers, file explorers, text editors and BICS Local, among other applications. If you are using BICS Local, make sure all users have logged out.
This helps prevent files or components of BICS Local from being used by other programmes during installation or uninstallation.
If files remain locked after you have followed the steps above, please contact the BICS Helpdesk for further assistance.
Experienced Windows users can try to restore the access permissions for the BICS folder using a batch file (.bat). This script changes the ownership and access permissions of files in C:\BICS2. Only run it if you understand what the commands do and have the necessary administrator privileges.
Create a file with the .bat extension, add the commands below and run the file as an administrator. Before doing so, check that C:\BICS2 matches the BICS installation folder on your computer.
SET DIRECTORY_NAME="C:\BICS2"
TAKEOWN /f %DIRECTORY_NAME% /r /d y
ICACLS %DIRECTORY_NAME% /grant administrators:F /t
ICACLS %DIRECTORY_NAME% /reset /T
PAUSEPlease note: these commands change the permissions of files and folders. If you are unsure how to use them, please contact the BICS Helpdesk first.
Why can I specify ports during the installation of BICS Local?
During the installation of BICS Local, you can specify which network ports BICS uses. By default, HTTP port 80 and HTTPS port 443 are configured. You do not normally need to change these settings.
In some situations, however, you may need to use different ports. This may be necessary, for example, if another application on your computer is using the same ports or if your network configuration needs to meet specific requirements set by your organisation.
Not sure which ports to configure? Keep the default settings unless your system administrator or the BICS Helpdesk advises you to change them.
How do I uninstall BICS Local?
You can uninstall BICS Local from your computer using the uninstaller provided with the installation. The steps differ depending on your operating system.
Please note: uninstalling BICS Local also removes your local BICS data, such as vessel details and voyages. Make sure you back up any data you want to keep before uninstalling.
Windows
Open the folder
C:\BICS2\Uninstalland run the fileUninstall BICS2 Installation.exe.Alternatively, open Control Panel, go to Programs and Features, select BICS2 and click Uninstall/Change.
- Follow the instructions provided by the uninstaller to remove BICS Local from your computer.
macOS (Apple)
To uninstall BICS Local on macOS, use Terminal. These instructions apply to installations where BICS is located in the folder /Applications/BICS2.
- Open the Terminal app.
Navigate to the folder containing the uninstaller:
cd /Applications/BICS2/UninstallRun the uninstaller:
sudo ./uninstall.sh- Follow any on-screen instructions. Once the process is complete, the BICS installation folder under
/Applicationswill be removed.
Linux
You need administrator privileges to uninstall BICS Local on Linux. To do so, use the sudo command in a terminal window.
Open a terminal window and navigate to the folder containing the uninstaller:
cd /opt/bics2/Uninstall/Run the uninstaller:
sudo "./Remove BICS2 Installation"- Follow any on-screen instructions. Once the process is complete, the BICS installation folder under
/optwill be removed.
Folder remains after uninstallation?
You may receive a message after the process has finished stating that a particular folder cannot be deleted. First check whether the uninstaller has completed successfully and whether any BICS processes are still running. If you are certain you have identified the correct folder, delete any remaining folder(s) manually.
How do I remove the MySQL service for BICS Local version 5 from my computer?
If you have manually uninstalled BICS Local version 5 and then want to install BICS Local version 6, the installation may fail if the old bics2mysql service is still present on your computer. In that case, you may need to remove this service first.
Follow the steps below to remove the service in Windows.
Step 1: Open Command Prompt as an administrator
- Open the Start menu or press the Windows key.
- Type
cmdin the search box. - Right-click Command Prompt in the search results.
- Select Run as administrator.
Step 2: Remove the service
Type the following command in Command Prompt:
sc delete bics2mysql- Press Enter to execute the command.
This command instructs Windows to remove the bics2mysql service. If the service is still running at that point, the removal may not be completed until the service has been stopped.
Once the process is complete, check that the service has been removed before trying to install BICS Local version 6 again.
Please note: only run this command if you want to remove the old MySQL service for BICS Local version 5. If you are unsure, first check whether the service is actually part of the old BICS installation.
Using BICS
How do I update my vessel details?
You can update your vessel details via the hulls menu in BICS. Follow the steps below.
- Click the menu button in the top-right corner of the BICS main screen.
- Click on âHullsâ.
- You will now see an overview of your vessel details. Click the pencil icon to the right of the vessel you want to update.
- Make the required changes and click âSaveâ.
Please note: enter your vessel's dimensions to the nearest centimetre, in accordance with the details on the measurement certificate. Incorrect vessel details may cause problems when processing your voyage report and determining the permitted navigation route.
What statuses can a voyage report have in BICS?
When you submit a voyage report via BICS, it goes through several statuses. The status indicates whether the voyage report still needs to be sent, whether the transmission is being processed and whether the report has been successfully delivered to the receiving authority system.
A voyage is considered reported once it has the status âReportedâ and a blue bar.
Possible voyage report statuses
| Status | Meaning |
|---|---|
| Planned | The voyage report has been created in BICS but has not yet been sent. |
| Reporting in progress | BICS has sent the voyage report, but the receiving authority system has not yet received it or returned an acknowledgement. |
| Reported | The receiving authority system has successfully received the voyage report, or no acknowledgement is required. |
| Not reported | The voyage report has been rejected or could not be delivered to the receiving authority system. |
How can I check whether my voyage report has been sent and acknowledged?
In BICS, you can check the date and time fields in the voyage's Communication history to see the progress of the report:
- Sent: if the âDate/time sentâ column contains a date and time, the voyage report has been sent.
- Response: if the âDate/time responseâ column contains a date and time, a response has been received.
What does the status âReportedâ mean?
The status âReportedâ means that, according to the feedback from the receiving authority system, the voyage report has been processed successfully. Authority systems in the Netherlands, Flanders and Germany send an acknowledgement. Some systems do not routinely send a response; in those cases, the voyage can still receive the status âReportedâ.
What should I do if the status is âNot reportedâ?
The status âNot reportedâ appears when a rejection has been received or when the voyage report cannot be delivered to the receiving authority system.
Check the error code displayed and resolve the underlying issue. Then try submitting the voyage report again. If this does not work, please contact the BICS Helpdesk.
What should I do if I cannot submit a voyage report?
Is your voyage report stuck on the status âReporting in progressâ, or are you unable to send a voyage report? First check whether the message was actually sent and whether you have received a response.
Check the communication history
Go to the relevant voyage in BICS and click âCommunication historyâ. Check the following fields:
- Date/time sent: if this field is filled in, the message has been sent from your BICS system.
- Date/time response: if this field is filled in, a response has been received from the relevant authority. Please note that not all authorities send an acknowledgement.
Steps to resolve the problem
Are you unable to send the report, or is the voyage stuck on âReporting in progressâ? Try the following steps:
- Check your internet connection: Make sure you are connected to the internet and that the signal is strong enough. Network coverage may be limited along some waterways.
- Check your account details: Make sure you have entered the details from your Welcome email correctly in BICS. This is particularly important if you receive an authentication error.
- Check the error message: Open the relevant voyage in BICS and check whether an error message is displayed. Follow the instructions in the message.
- Check your antivirus software: Your security software may be blocking BICS communications. Check the settings or ask your system administrator for assistance.
- Restart your device: Restart your computer and try submitting the voyage report again.
- Create the voyage again: If the steps above do not help, enter the voyage details again and try submitting the newly created voyage report.
Is the problem still occurring? Please contact the BICS Helpdesk as soon as possible.
What should I do if electronic reporting is not possible during my voyage?
As the skipper, you remain responsible for complying with the mandatory electronic reporting requirements. If you cannot send an electronic report or do not receive an acknowledgement when one is expected, report this to the traffic control centre via VHF radio or by another means, and follow the instructions of the competent authority.
Problem with equipment on board: if electronic reporting is not possible because of faulty equipment on board, you must resolve the problem before starting or continuing your voyage. Make sure you still submit the required electronic report. Do not enter an area where electronic reporting is mandatory without complying with this obligation.
Shore-side failure or network problems: if electronic reporting is not possible due to a failure at the traffic control centre or other shore-side facilities, poor radio coverage or a complete network outage, contact the traffic control centre before departure or before continuing your voyage. Agree on how and when you will provide the required details.
How can I prove that I have attempted to submit my voyage report?
If you need to prove that you have attempted to submit your voyage report electronically, you can download the transport document from BICS:
- Go to the relevant voyage.
- Click âDocumentsâ.
- Select âTransport documentâ.
- Click âDownloadâ.
Keep this document as evidence of your attempt to submit the report. The transport document does not automatically replace the mandatory electronic report or any arrangements made with the traffic control centre.
When should I manually approve or reject a voyage report?
Once a voyage report has been submitted to the authority and has the status âReporting in progressâ or âCancellation in progressâ, you cannot modify the voyage. You can only modify or delete the voyage again after the message has been sent successfully and any acknowledgement from the authority has been received.
In exceptional circumstances, for example when an acknowledgement is not received or other problems occur, you can manually approve or reject the voyage report. This is only possible after the message has been sent and has the status âSentâ. Always carry out this action in consultation with the authority. Therefore, first check whether the authority has received and processed the voyage report.
Were you expecting an acknowledgement but have not received one? Contact the authority to check whether the voyage report has been received and processed. Then proceed as follows:
- The voyage report was sent to multiple authorities: if at least one authority has received and processed the voyage report, select âConfirm manually â in the user interface. This confirms the submission for the authorities that received and processed the message.
- The voyage report was sent to one authority: if this authority indicates that the voyage report was not received or processed, select âReject manuallyâ.
Please note: only use the Manually confirm or reject function in exceptional circumstances, not during normal use. A manual confirmation or rejection is shown on the transport document for the voyage.
What should I do if I experience problems reporting voyages in Flanders (Belgium)?
A waterway permit is required for many voyages on Flemish waterways. The voyage information you send via BICS is used for this purpose. Are you experiencing problems, for example because your voyage is not visible at a Flemish reporting station or lock? Check the following points:
1. Use the correct first reporting point
When creating a voyage report, select the first reporting point that is appropriate for your situation. For example, if you are travelling from the Netherlands to Flanders and have already crossed the border before you are required to report in Flanders, select âVLAANDEREN, BRUSSEL EN WESTERSCHELDE (ERIBA)â as the first reporting point when submitting your voyage, rather than IVS-Next.
Is your voyage report not visible at a reporting station or lock in Flanders? In the BICS main screen, click âResendâ. Select âVLAANDEREN, BRUSSEL EN WESTERSCHELDE (ERIBA)â as the reporting point and click âOKâ.
2. Specify at least two waypoints
In Flanders, the waterway permit is based on the route calculated by the EuRIS route planner using the location points in your BICS voyage report. Therefore, specify at least two waypoints within Flanders so that the route planner can determine your planned route as accurately as possible. Preferably select locks or other structures along your route.
You can check your calculated route using the EuRIS route planner. To do so, enter your departure point, destination and waypoints.
3. Check the dimensions of your sailing unit
The dimensions of your sailing unit partly determine which route you can navigate. The EuRIS CEMT map provides information about the maximum permitted dimensions on Flemish waterways and beyond.
Exceptions may be permitted in exceptional circumstances. Contact the RIS service of De Vlaamse Waterweg NV in good time.
4. Provide the correct billing details
Waterway dues are payable for most commercial shipping voyages in Flanders, including voyages without cargo. Therefore, provide the correct customer details and the associated VAT number for every voyage.
5. Check the departure and arrival dates
Check that you have entered the correct departure and arrival dates. Is an incorrect date shown in the voyage report? Cancel the voyage and submit a new voyage report with the correct dates.
Correcting details and resubmitting the voyage
Have you noticed an error in your voyage report? In the BICS main screen, click âEditâ next to the relevant voyage. Amend the details. If you are in Flanders, also set the first reporting point to âVLAANDEREN, BRUSSEL EN WESTERSCHELDE (ERIBA)â. Then click âSave & submitâ to resubmit the corrected voyage.
Are the problems still occurring? Please contact the BICS Helpdesk.
More information about electronic reporting in Flanders is available at www.visuris.be/meldtips.
What should I do if I get a localhost error when starting BICS Local?
Do you get the error message âLocalhost cannot find the webpageâ when starting BICS Local? One of the services required to use BICS Local may not be working properly. If this happens, restart your computer and try starting BICS Local again. Has this not resolved the error message? Please contact the BICS Helpdesk.
Are you an advanced user and do you use BICS Local on a Windows computer? You can try manually restarting the required services using Command Prompt. Before running the commands, check that BICS Local is installed in the expected location. Only follow these steps if you know how to run Command Prompt as an administrator.
- Open Command Prompt as an administrator.
Run the following command and wait for it to finish:
C:\BICS2\current\bin\bics2ctrl.bat services offHave you previously installed BICS Local version 5 on this computer? If necessary, you can clean up old services using the following command:
C:\BICS2\current\bin\bics2ctrl.bat services cleanupThen run the following command and wait for it to finish:
C:\BICS2\current\bin\bics2ctrl.bat services on- Wait approximately one minute to allow the services to start up fully. Then try opening BICS Local again.
How can I report voyages without cargo?
Are you not carrying any cargo? You can also submit a voyage without cargo via BICS. This ensures that the traffic control centres are aware of your voyage. The reporting process is largely the same as for a voyage carrying cargo. You enter the voyage details, but do not add any cargo lines if you are not carrying cargo and no special reporting obligations apply.
When must I report that I am âempty ofâ dangerous (ADN) cargo?
Have you previously transported dangerous goods and has the cargo been unloaded? Residues of those substances may still be on board, for example in a cargo hold or tank. For dangerous goods, you must therefore indicate in the voyage report which dangerous cargo you are empty of. This is referred to as âempty ofâ.
Reporting âempty ofâ makes clear which dangerous cargo you previously carried and of which residues may still be present. This information is important when assessing safety risks and may also affect the required vessel signalling.
How do I report a voyage when I am âempty ofâ dangerous cargo?
- Click â+ New voyageâ and enter the required voyage details.
- Under the cargo details, add the dangerous goods you are empty of and tick the âEmpty ofâ checkbox.
- Check the details you have entered and submit the voyage as usual.
Please note: even if you are no longer carrying any cargo, it may be necessary to include the dangerous goods previously carried as cargo lines. Follow the applicable ADN regulations and the instructions relevant to your voyage.
What is the BICS backup and restore function?
BICS has a âBackup & restoreâ function that can be used to create a backup of all your vessel details and address details. You can load this data back into BICS at a later date. This is useful, for example, if you reinstall BICS or start using it on another device.
Creating a backup
- Open BICS and click âBackup & restoreâ in the menu.
- Click âCreate backupâ.
- The
backup.zipfile will be downloaded automatically. This file contains your vessel details and address details from BICS.
Restoring a backup
- Open BICS and click âBackup & restoreâ in the menu.
- Click âRestore backupâ.
- Select the previously downloaded
backup.zipfile. - Follow any instructions shown in BICS. Once the restore is complete, the vessel details and address details from the backup will be available again.
Would you like to restore vessel details from an older version of BICS? Please refer to the instructions for importing hull data from outdated versions of BICS Local.
How can I report a convoy using BICS?
Does your sailing unit consist of several coupled vessels? You can submit this combination as a convoy in BICS. To do so, first add all the vessels involved to your sailing unit, then select them when creating the voyage report.
Step 1: Add all vessels to your sailing unit
Open the hulls menu in BICS and click â+ Hullâ. Add all the vessels that form part of the convoy. Check that the details for each vessel have been entered correctly.
Step 2: Create a new voyage
- Click â+ New voyageâ in the BICS main screen.
- Go to the âSailing unitâ section.
- Under âHullâ, select the first vessel in your convoy.
- Click â+ Add hullâ to add the next vessel. Repeat this until all vessels in the convoy have been included.
Step 3: Configure the convoy
- Under âNaming vesselâ, select the vessel that determines the convoy's identity. This is usually the vessel that propels the convoy.
- Select the correct convoy type. You can also let BICS determine this by clicking âSuggest convoy typeâ.
- Check the dimensions of the convoy. Depending on the selected convoy type, BICS will fill these in automatically.
- If applicable, select the convoy orientation: âwideâ or âlongâ.
- Enter the current draught of the convoy.
Step 4: Submit the voyage
Complete the remaining required voyage details and check that the convoy details are correct. Then save the voyage and submit it.
What is the âMessage Service Accountâ menu used for?
In BICS Local, you will find the âMessage Service Accountâ menu. Here you can manage the settings required to use BICS securely and exchange voyage reports with waterway and port authorities. The menu contains the following sections:
Rijkswaterstaat Inland Shipping Account
This section allows you to log in and out using your Rijkswaterstaat Inland Shipping Account. Logging in is required to secure access to HERMES (the messaging service) from BICS and to send messages via BICS.
You can find the required login details in the Welcome email. After logging in, you will be asked to select the correct Reporting ID. Only Reporting IDs linked to your account will be displayed.
Automatically forward voyage reports
This setting determines whether your voyage reports are automatically shared with waterway and port authorities. If you disable this option, you must manually submit your voyage reports to each relevant waterway or port authority yourself.
What is the First Use Wizard?
The First Use Wizard helps you configure BICS Local for the first time. The wizard appears after a new installation when you start BICS for the first time and log in. Follow the steps to configure BICS Local so that you can immediately start creating and sending voyage reports.
Step 1: Waiting for data
BICS downloads the latest reference data. This step is completed automatically.
Step 2: Demo mode
Choose whether you want to install BICS in demo mode. For normal use, select 'No' here.
Step 3: Import
Choose whether you want to import a backup. Select 'Skip' if you do not want to use a backup.
Step 4: Message Service Account settings
Click the 'Log in' button and log in using your Rijkswaterstaat Inland Shipping Account:
- Enter your username (as stated in your Welcome email) or your email address, together with the password for your Rijkswaterstaat Inland Shipping Account, and click 'Log in' again.
- Then select the correct Reporting ID from the list (as stated in your Welcome email) and click 'Confirm'.
Step 5: Sender address
Enter your address details as stated in your Welcome email:
- In the 'Organisation / company name' field, enter the name of your organisation or company.
- In the 'Identification' field, enter a three-letter code of your choice, for example your initials.
Step 6: Hulls
Enter the details of at least one vessel. To do so, click â+ Hullâ and enter the requested details accurately to the nearest centimetre, in accordance with your measurement certificate.
Please note: you are responsible for ensuring that the details you enter in BICS are correct; they must match your measurement certificate. Providing incorrect details may hinder the smooth and safe passage of your voyage.
Completing the wizard
Click 'Finish' to complete the First Use Wizard. BICS is now ready to use.
What network requirements must be met to use BICS Local?
This article applies exclusively to BICS Local, the installable version of BICS. The network requirements in this article do not apply to BICS Portal.
BICS Local requires access to certain web addresses and network ports to function correctly. Are you experiencing problems with BICS Local that may be caused by your network? Check whether the requirements below are being met.
Are you unable to resolve the issue? First contact your network administrator and ask them to check the accessibility of the web addresses and ports listed below. If the problems persist, contact the BICS Helpdesk.
Required web addresses
The following URLs must be accessible from your network:
Required network ports
The following network ports must not be blocked:
- HTTP: port 80
- HTTPS: port 443
Have you configured other ports during the installation of BICS Local? Check that these ports are available and are not being blocked.
IP protocol support
BICS Local supports IPv4 only. IPv6 is not supported.
How do I provide a VAT number for the invoicing of waterway dues?
Via BICS, you can include a VAT number with your electronic voyage report for the invoicing of waterway dues. To do so, you must add the VAT number to the relevant address in your address book and then select that address as the invoice address in the voyage report.
Step 1: Add a VAT number to an address
- Open the menu in BICS and go to âAddress bookâ.
- Click the pencil icon next to an existing address to edit it. You can also create a new address.
- Enter the valid VAT number in the âVAT numberâ field and save the details.
Step 2: Select the correct invoice address for your voyage
- Create a new voyage report or open an existing voyage report to edit its details.
- Under âInvoice addressâ, select the address to which you have linked the VAT number.
- Check the details before saving and submitting the voyage report.
For every voyage report for which waterway dues are invoiced, check that the correct invoice address has been selected. This ensures that the associated VAT number is included with the voyage report.
Which convoy type and seagoing vessel types can be used for seagoing combinations?
To report seagoing combinations in BICS, you can use convoy type 1602 'Tugboat tugging (maritime)'. This convoy type is only permitted for a limited group of seagoing vessel types.
Only the vessel types listed below may form part of a vessel unit using convoy type 1602. Other seagoing vessel types cannot be included in this convoy.
If you combine vessel types that are not permitted, the âConvoy typeâ field will remain empty when you click âSuggest convoy typeâ in BICS.
Permitted vessel types for convoy type 1602
| Vessel type | Description | Can be the naming vessel? |
|---|---|---|
| 1601 | Tugboat alone (maritime) | Yes |
| 1606 | Oil rig (maritime) | No |
| 1700 | Ocean sailing vessels N.O.S. | Yes |
| 1724 | Pontoon (maritime) | No |
| 1780 | Ocean sailing object (dead) | No |
| 1781 | Crane, floating (maritime) | No |
| 1782 | Dock, floating (maritime) | No |
When configuring your seagoing combination, make sure you use permitted vessel types and check which vessel can be selected as the naming vessel.